Angle determination

Component removal

The LTSOT500 series scanning sensor installed on a robot gripper detects the position of components in blister packaging and, in the process, also differentiates between various versions of the component.

Prior to its access run, the robot moves over the entire component or over the relevant sections.

At the same time, the scanner system from the LTSOT500 series integrated in the robot gripper scans these areas, and thus determines the current position of the component.

The displacement of the component determined in x- and y-direction is transferred to the robot control system via an Ethernet connection.

To the LTSOT500 product

Can lids

Image processing system for optical angle determination. The position of the pull tab on marked and unmarked can lids is supposed to be recorded, and the positional data transmitted to the subsequent station.

The positioning of the pull tab is done during the run on non-homogeneously conveyed can lids.

continue to general image processing

Shipping crates

During its "orientation run", the robot moves over the entire shipping crate or the section relevant for the orientation and positioning.

At the same time, the scanner system from the LTSOT500 series integrated in the robot gripper scans this area, and thus determines the current position of the component.

The displacement of the component determined in x-direction is transferred to the robot control system via an Ethernet connection.

To the LTSOT500 product



Wente/Thiedig GmbH

Gewerbepark Querumer Forst
Spechtweg 1
38108 Braunschweig

Tel:              +49 531 / 2 19 45 69 - 0
Fax:             +49 531 / 2 19 45 69 - 99
Mail:            info@wente-thiedig.de

kontakt